Aquaking Q4003 – 7000 L/Hr High Pressure Sump Pump
The Aquaking is a heavy-duty pump that will move a phenomenal 7000 litres of water per hour through an outlet adapter that can easily be connected to various sizes of piping, making it the perfect option for those looking to move substantial volumes of nutrient solution in large systems.
- Moves 7000 l/ph – nearly two litres every second!
- Fully submersible
- Consistent flow and excellent reliability
- Produces a jet 8 metres tall!
- Highly robust with an excellent build quality
- Various outlet sizes for easy connection
How the Aquaking Q4003 Works:
The Aquaking is a heavy-duty pump that moves a phenomenal 7000 litres of water per hour. That’s over 116 litres every minute, approaching 2 litres per second! The Q4003 draws liquid in through its underside and drives it out through an outlet point with an external diameter of 45mm. An adapter fits onto this outlet point which reduces the outlet size to a 30mm. And on to that adapter, a click-fit connector can be screwed on to facilitate the quick and easy connection and disconnection of 13mm and 25mm (inner diameter) piping – two standard sizes in many hydroponic and nutrient delivery systems.
The Aquaking was designed and built with robustness as a priority, as its primary use is for dealing with flooded basements and cellars. Follow the guidelines in the manual and you can be assured of its consistency and reliability.
Using the Aquaking Q4003:
Set-up of the Aquaking is relatively straightforward. The Q4003 will draw in any liquid that it is submerged in through its underside, driving it through its outlet point. The outlet point is supplied with a click-fit connection for ease of use. Screw the male half of the click-fit connection on to the threaded black outlet point. Standard 13mm and 25mm (inner diameter) flexi pipe can then be fitted to the female half of the adapter.
To fit 25mm pipe, remove the green screw cover from the female adapter and push the pipe over the top of the prongs that surround the outlet point, using the threads to secure the pipe in place. Dip the end of the pipe in a jug of half boiled water before pushing it on to make the job easier.
To fit 13mm pipe, first push the screw cover over the pipe so that the threaded end faces the edge of the pipe and push the pipe onto the female adapter so that it sits underneath the prongs on the outlet point. Then screw the cover back into place so that it secures the pipe. The female adapter will click into place whenever it is pushed onto the male adapter, securing it over the outlet point. The pipe and female adapter can be quickly removed from the pump and male adapter by sliding the release mechanism.
Do not run this pump dry or you could risk burning out the motor.
Flow rate: 7000l/h
Max jet height: 8 m
Power consumption: 400w
Dimensions: 210mm (max diameter) x 310mm (height)